Advance Cannula, 5 Fr OD x 455 mm Working Length, Sterile, Single-Use, Disposable, Ethylene Oxide Sterilization, with Endometrial Suction Pipet Curet, For ES9000 Endosee Advance Display Module
The cannula contains a miniature camera and LED illumination at the tip. The cannula connects to the display module through an electrical connector. The cannula has an inner channel for the infusion of fluid. Fluid infusion is achieved by attaching either a pre-filled syringe or a pressurized bag of distending medium to the inflow port through an extension tube or a tubing set. The outflow port is at the distal tip of the cannula and empties out around the tip to infuse fluid into the uterine cavity or female bladder. The Cannula has a pre-curved tip section at an angle of 20 +/- 5. The cannula tip section should not be altered. The cannula maximum temperature will not exceed 41C. The Cannula allows the introduction of standard endoscopic instruments to the uterine or bladder cavity if desired.
